Products manufactured by Huangshan Jinfeng Industrial Co.,Ltd.

      JFTM Epoxy Resins Series:  E-12 (604#) -----equv. to DER663U
                                                 E-14 (604-4#)
                                                 E-20 (601#) -----equv. to DER671
                                                 E-12JF (in flake form)
  
       JFTM Curatives Series:TGIC -----equv. to TEPIC G & PT710
                                          Powder flowing agent -----6088 equv. to PV88
                                          E-12BLP Solid Diffluent Agent (with10% flowing agent)
                                          MMA-BuA Copolymer Brightening Agent
                                          E-12G03 (with 10% brightening agent)
                                          BLP-402 Fluid Diffluent Agent
                                          Matting Agent MB-68 -----equv. to Degussa B68
                                          Hardener MB-31 -----equv. to Degussa B31
                                          Hardener MB-55 -----equv. to Degussa B55

Products Manufactured by JF-licensed plants

       Saturated  Polyester Resins Series:
                                                 P-9300F TGIC---(93:7  )--Pure polyester resin
                                                 P-7013-----------(70:30)--for low gloss coatings
                                                 P-7013H---------(70:30)--for high gloss coatings 
                                                 P-6016 ----------(60:40)
                                                 P-5016 ----------(50:50)        

      Pigment:                             DX fluorescent pigment
                                                 DP fluorescent pigment
                                                 DZ fluorescent pigment
                                                 PMA(Pyromellitic Acid)
 
        Agents:                             Lithepone
                                                 TiO2
                                                 Benzoin

Hardener MB-55

JFTM Hardener MB-55(Same as Degussa VESTAGON B55 Matt Hardener) is Epoxy Resin Hardener /Epoxy Resin Curing Agent.
It is used as hardener for pure epoxy resin , epoxy\ polyester hybrid powder coatings to achieve coatings with matt surface having excellent mechanic quality and wonderful appearance.

Characteristics	Appearance	fine powder(white)
	Melting range	220-225℃
	Purity	>=99%
Application	Matt curing agent M68 for epoxy resin and epoxy polyester hybrid powder coatings is used to achieve coatings with matt surface having excellent mechanic quality and wonderful reappearance.
Specific instructions	Recommending formula	Gloss 60℃	5-6	20	40	70
		Epoxy (663U or E-12)	54.5	39.7	35.7	31.8
		Polyester (acid valve:25-35mgKOH/g)	----	14.8	20.8	26.7
		M68	5.0	5.0	40	1.0
		Filling material(BaSo4,CaCo3)	40	40	40	40
		Levelling agent	0.5	0.5	0.5	0.5
		Carbon black	0.5-1	0.5-1	0.5-1	0.5-1
	Recommending curing condition	180℃	20-25 min
		190℃	10-12 min
		200℃	8-10 min
Notice	a.The M68 's compatibility with resin isn't well for its high melting point, to avoid this default it's necessary to distrbute them or to make the curing temperature at a higher level.
	b.In the case of epoxy polyester hybrid powder coatings, the polyester used should be low ccidity.Before acid valve the ideal gloss and multiple characteristics tests are needed.
Storage	The storage period could last a rather long time when it is kept inside the sealed container.Do seal the container again after taking some from it.

DX fluorescent pigment

DZ fluorescent pigment

Available Color	Color Code
DP  SERIES
White	DP-20
Lemon Yellow	DP-10
Green	DP-11
Orange Yellow	DP-12
Orange	DP-13
Red Orange	DP-14
Red	DP-15
Cerise	DP-16
Pink	DP-17
Magenta	DP-18
Blue	DP-19

Highlight of Properties:
Thermoset, narrow distributed microspherical particles render properties of good resistance to solvent and bleed, and excellent light scattering and opacity, dispersability, tinting strength, and broad compatibility.
Recommended Applicatoins:
Bleed Resistant Vinyl Plastisols, Specialty Coatings/Inks, Solvent Sensitive Systems, and Crayons
Caution:
In the production of plastics ,it is impossible to completely evaluate the effect , when the additive which contains ionic zinc, ionic magnesium , ionic calcium, and ionic steel mixes with DP fluorescent pigment. They must be tested for satisfactory performance in the system intended to be used with them.

Pyromellitic Acid (PMA) 

General description:
1. Useful as raw material producing polyimide.
2. Useful as raw material producing tetraoctyl ester of Pyromellitic Acid.
3. Useful as paints.

Chemical Name	BENZENE-12345-TETRA-CARBOXYLIC Acid
Formula	C10H6O8	Structural Formula:
CAS#	89-05-4
Molecular Wt	254
Melting Point	>=282C
Purity wt	>=98.5%	Volatile Fraction  wt	<=0.5%
Ash Content	<=400ppm	Organic Impurity  wt	<=1.5%
Form	Powder	Color	White

LITHEPONE

Main product

Product name	Characteristics	Range of application	Voluntary standards	Packing
B301	lithopone White pigment, zinc sulfate content is 28%. Hiding power is stronger than zinc oxide,lower than titanium dioxide,good heat endurance.	Coating, paint producing, printing ink, plastic,rubber, paper making, enamel etc.	GB/T1707-1995	Plastic weaving bag with polyethylene liner or paper bag,50kg or 25kg per bag.
B302	lithopone White pigment, zinc sulfate content is 28%. Dispersancy is better than B301 after surface preparation.	Coating, paint producing, printing ink, plastic, rubber, paper making etc.	GB/T1707-1995	Plastic weaving bag with polyethylene liner or paper bag,50kg or 25kg per bag.
B311	lithopone White pigment,zinc sulfate content is 30%. Stronger hiding power and reducing power than B301. Better dispersancy.	Coating, paint producing, printing ink, plastic,rubber, paper making, enamel etc.	GB/T1707-1995	Plastic weaving bag with polyethylene liner or paper bag,50kg or 25kg per bag.

Lithopone national standard GB/T1707-1995

Item	Index
	B301			B302			B311
	Top grade	First grade	Qualified products	Top grade	First grade	Qualified products	Top grade	First grade	Qualified products
Sumtotal of zinc (base on zinc sulfate and barium sulfate)%(m/m) ≥	99			99			99
Total zinc amount (base on zinc sulfate)%(m/m)≥	28			28			30
Zinc oxide,%(m/m)≤	0.6	0.8	1	0.3	0.3	0.5	0.3	0.3	0.5
105 ℃volatile%(m/m) ≤	0.3	0.3	0.5	0.3	0.3	0.5	0.3	0.3	0.5
After Soluble in water%(m/m)≤	0.4	0.5	0.5	0.4	0.5	0.5	0.3	0.4	0.5
Residue on sieve (63um sieve pore) %(m/m)≤	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
Color(compare with standard sample)	Exc- elled	Approx- imately	slight poorer	Exc- elled	Approx- imately	slight poorer	Exc- elled	Approx- imately	slight     poorer
Water extraction alkaline hardness	Neutral
Oil absorption, g/100g	14			11			10
Reducing power (compare with standard sample),% ≥	105	100	95	105	100	95	105	100	95
Hiding power (contrast ratio)	Not lower than 5% of standard sample

BENZOIN

Benzoin ( 2-Hydroxy-1.2-Diphenylethanoe)
Benzoin is also called 2-Hydroxy-1.2-Diphenylethanoe.
It can be applied to chemical industry, pharmaceutical products etc.With rapid development of powder coatings, it is extended to this new field to overcome the defects of pinlldes etc., which is caused by powder coating raw material bonzoin is an ideal additive in powder coatings production.

Appeance:	Off-white powder
Melting Point:	133~137℃
Boling Point:	344℃
Specific Gravity:	1.31
Solubility In Water:	0.03g/100ml
Vapor Pressure:	1.1
Molecular Weight:	212.25
Molecullar Formula:	C14H12O2
Stability:	Stable under ordinary conditions

Using methods:

To add benzoin in conpounded powder coatings and mix competely.Recommended level of use
(based on total weight of compounded powder coatings).

For Imported Resins,pigments and fillers:0.3-0.4%

For Iocal resins,pigments and fillers:0.5-0.6%

  TiO2

It is anatase type titanium dioxide made by vitriol method. The product has excellent optical character, high purity, good whiteness, outstanding hiding power and good dispersibility. It is suitable for inside-wall coating, paints in interior decoration, primer paints, rubbers, paper and leathers, etc. (note: recommended to use in aqueous coatings)

The major technical performances(Q/HYY001-2002)

(TiO2 content)%≥: 98.0
Color compared with standard sample: No lower than
Tint reducing power compared with standard sample≥:  100
(Oil Absorption) g/100g≤:  22
Mesh residue 45um%≤  0.05
Water soluble object %≤:  0.5
PH Value of Aqueou Suspension:   6.5-8.0
Volatile at 105℃:  0.5
Packing:  25kgs/bag